riot
16-02-2005, 02:07 AM
so i finally got the Socket Hold Down (socket A) for my water block cause my MB doesnt have mounting holes.
any way the only leak is at the pump, which i havent located yet, but will in the next 2 days.
had a test run today, tried to put my cpu upto 2.3v, AGP 1.65v, RAM 1.75v plus the 80w peltier on my graphics.
the actual CPU votage was 1.97v but it got my 2500+ stable for the first time at 200mhz!! yay!
the temps were about 40 for cpu @ 1.97v and 29 for NB. dont know about the Graphics card. but it was slightly warm, with the volt mod.
bear in mide that the RAD is fanless, with a house fan the cpu droped down to 24, NB about 20.
overclocks:
2500+ to 3200+
GeCube 9600XT- Extreme from 500/350 to 580/410
NOT STABLE, as my SF 500w PSU was unable to keep up, 2.4v on the 3.3 rail while playing NFSU2. the 12v @ 11.6 and the 5 @ 4.9
so untill i get my two ultra X-connect 500w PSU's and sit'em both in my stacker case
i'll have to be gental with voltages and overclocking. mostly cause the Peltiers sucks 8amps off the 12v.
once i get both x-connect psu's i will add the other peltiers - 170w for CPU, 50w for NB
pics soon to follow.
EDIT:
PICS:
RAD: http://www.comcen.com.au/~gordin/images/pic11.jpg
**(56k warning) Vid CARD: http://www.comcen.com.au/~gordin/images/Vm...tlightsmall.JPG (http://www.comcen.com.au/~gordin/images/Vmod/frontlightsmall.JPG) **
Setup: http://www.comcen.com.au/~gordin/images/WC/WCsetup.jpg
more pics will follow.
any way the only leak is at the pump, which i havent located yet, but will in the next 2 days.
had a test run today, tried to put my cpu upto 2.3v, AGP 1.65v, RAM 1.75v plus the 80w peltier on my graphics.
the actual CPU votage was 1.97v but it got my 2500+ stable for the first time at 200mhz!! yay!
the temps were about 40 for cpu @ 1.97v and 29 for NB. dont know about the Graphics card. but it was slightly warm, with the volt mod.
bear in mide that the RAD is fanless, with a house fan the cpu droped down to 24, NB about 20.
overclocks:
2500+ to 3200+
GeCube 9600XT- Extreme from 500/350 to 580/410
NOT STABLE, as my SF 500w PSU was unable to keep up, 2.4v on the 3.3 rail while playing NFSU2. the 12v @ 11.6 and the 5 @ 4.9
so untill i get my two ultra X-connect 500w PSU's and sit'em both in my stacker case
i'll have to be gental with voltages and overclocking. mostly cause the Peltiers sucks 8amps off the 12v.
once i get both x-connect psu's i will add the other peltiers - 170w for CPU, 50w for NB
pics soon to follow.
EDIT:
PICS:
RAD: http://www.comcen.com.au/~gordin/images/pic11.jpg
**(56k warning) Vid CARD: http://www.comcen.com.au/~gordin/images/Vm...tlightsmall.JPG (http://www.comcen.com.au/~gordin/images/Vmod/frontlightsmall.JPG) **
Setup: http://www.comcen.com.au/~gordin/images/WC/WCsetup.jpg
more pics will follow.