Trouble Port Forwarding

[LMo]

I am going to sound like an absolute nub asking this, but here we go.

I have a D-Link DSL-502T, i access the router, go into the correct screen in the firmware, type in what i need and i'm having problems:

Rule Name: Torrent1
Protocol: TCP,UDP
Start Port: 6346
End Port: 6346 (as i only want that port open)
Port Map: (blank)

I click apply and i get this message "Please select a end map as asn integer"

I've gotten past this point before (Didn't get that message) but even still, i couldn't find a way to save and restart, there is no button on the bottom right hand side of the screen as i've been told...

Can anyone help?

Thanks...Your local nub...LMo

[PHOENIX_12]

it could be the same as my router, mine dosen't allow you to forward some ports, try another port, if that dosen't work see if it allows you to open a string of ports with that in it

[DrSp3d]

i use port 65500 for my torrents...

works a charmer :D

[LMo]

Never mind lol...It was the blank "Port Map" section that wasn't letting me through -_-

Still getting told my system is behind a NAT router or firewall though, even though the port is forwarded and the firewall has exceptions created for the prog i'm using :/

[PHOENIX_12]

meh i get told that too, but my dl's are still faster :P

[LMo]

Mine are -...Max 20KB/s on torrents :/

[PHOENIX_12]

116kbs max down and 150kbs max up


that's on my work connection tho, i get slower at home but that's caus it's only 512 and takeing into account upload's and downloads the speeds i get at home are about right

[LMo]

I should be getting 160KB/s down...but i just can't with shareaza, everywhere else is fine. I've checked the speed it should be downloading (it tells you in shareaza how fast they can upload it to you) and i'm nowhere near it...